Precision
Multi-Axis
CNC Milling
3-axis, 4-axis & full 5-axis simultaneous machining to ±0.001mm to ±0.005mm for procurement teams and engineers who can't afford a bad batch. Prototype to production — 40+ materials, quoted within 24 hours, delivered DDP anywhere in the world.
Trusted by Engineers Across Critical Sectors
From single prototypes to long-run serial production — we serve the world's most demanding precision engineering sectors. Find your industry below to see the tolerances and certifications that matter to you.
Aerospace
Turbine housings, structural brackets, flight-critical components to AS9100D
Medical
Surgical guides, implant components, orthopaedic instruments — ISO 13485
Automotive
Prototype manifolds, EV battery housings, transmission components — IATF 16949
Robotics
End effectors, servo mounts, chassis plates, precision motion hardware
Industrial
Valve bodies, custom gears, pump housings, hydraulic manifolds
3-Axis, 4-Axis & 5-Axis CNC Milling
Three axis configurations, three different cost-per-part curves. A quick spec comparison below — for the full mechanical breakdown of how each one actually works, see the process guide underneath.
3-AXIS
3-Axis Milling
The cutting tool moves in three linear axes while the part stays fixed in a vice. The standard for flat, prismatic geometry at the lowest cost per part.
4-AXIS
4-Axis Milling
A rotary A-axis lets the part index or continuously rotate, machining multiple faces in one setup without re-fixturing.
5-AXIS SIMULTANEOUS
5-Axis Milling
Two rotary axes let the tool approach from almost any vector, cutting undercuts and freeform surfaces in a single clamping.
Still not sure which axis count your part needs?
Reach for 3-Axis
Every functional feature is reachable from directly above, or from one or two indexed sides. This is the lowest cost per part and the fastest quote-to-ship time — right for brackets, plates, and enclosures at any volume.
Reach for 4-Axis
Features sit on more than one face around a shared axis and need to stay in true position relative to each other — manifolds, camshafts, D-shaft fittings. A rotary axis machines them without re-fixturing.
Reach for 5-Axis
Undercuts, compound angles, or continuously curved surfaces that no fixture flip could reach — impellers, turbine blades, implants — or any part where single-setup accuracy outweighs cycle time.
All our 5-axis machining centres are equipped with Renishaw RMP60 wireless spindle probing and Renishaw OMP60 workpiece inspection — delivering in-process dimensional verification, automatic tool length measurement, and first-part-correct accuracy on every production run.
How Each Axis Configuration Actually Works
The mechanics behind each process — how the part is held, how the tool approaches it, what modes are available, and where each one hits its limit.
3-Axis Milling
4-Axis Milling
5-Axis Simultaneous Milling
Micron-Level Tolerances Across All Materials
We consistently exceed the ISO 2768-m general tolerance standard across every material category. The figures below represent our achievable tolerances under controlled production conditions — not theoretical limits.
See CNC Machining CapabilitiesMachine Specifications
Quality & Inspection Equipment
Every production order includes in-process and post-process dimensional inspection using calibrated equipment traceable to national standards (NIST / NPL).
Accepted CAD File Formats
STEP (.stp / .step) is preferred for maximum geometric fidelity. We also accept IGES, SolidWorks (.sldprt), Parasolid (.x_t / .x_b), AutoCAD (.dwg) and PDF engineering drawings with full GD&T annotation.
Metalworks Plus vs. a Typical Overseas CNC Supplier
Sourcing CNC parts from China usually means a trade-off between price and control. Our model is built to remove that trade-off — direct engineering access, in-house inspection, and documentation your quality team can actually audit.
Dedicated Applications Engineers
Every account is reviewed by an English-speaking engineer, not a translated sales queue — so DFM feedback and tolerance questions get resolved on the first email.
Traceable Production Data
SPC charts, FAI reports and CMM data are logged against your part number, so repeat orders arrive statistically consistent — not just visually similar.
One Point of Accountability
Machining, finishing, inspection and export documentation all happen under our own roof — no hand-offs between subcontracted workshops.
Surface Treatments for CNC Milled Parts
All surface finishing processes are managed within our supply chain. Parts arrive ready to use — no secondary processing required on your side.
CNC Machining CapabilitiesAnodizing (Type II & III)
Hard-coat and standard anodizing in clear or custom colour. MIL-A-8625 compliant.
Powder Coating
Electrostatically applied. Full RAL colour range, textures from matte to gloss.
Brushed & Mirror Polishing
Uniform satin grain (Ra 0.4 μm) to optical mirror finish (Ra <0.1 μm).
Electroplating
Nickel, hard chrome, zinc, gold and silver. Adds hardness and conductivity.
Bead & Sand Blasting
Glass bead or ceramic media for uniform matte texture. Ideal prep for coating.
Passivation
Citric or nitric acid passivation per ASTM A967 for maximum corrosion resistance.
Black Oxide
Low-friction, anti-glare magnetite coating. Preserves dimensional accuracy.
Heat Treatment
Stress relieving, hardening, tempering and carburizing with full traceability.
Ra surface roughness as-machined: 0.8 – 3.2 μm · Post-polished: 0.2 – 0.8 μm · Mirror: <0.1 μm
40+ Materials for Any Engineering Application
From common structural alloys to exotic aerospace superalloys and high-performance polymers — we stock, certify, and machine the widest material range in the industry.
Certified Raw Material
Mill certs (EN 10204 3.1 / 3.2) provided. Full traceability to melt batch.
Exotic Alloy Specialists
Inconel, Monel, Hastelloy, Titanium Ti-6Al-4V — materials others struggle with.
Medical-Grade Polymers
PEEK, UHMW, PTFE, Ultem — biocompatible machining with full cleanliness protocols.
- AlAluminum 6061
- AlAluminum 7075
- SSStainless 303 / 304
- SSStainless 316 / 316L
- SS17-4PH Stainless
- BrBrass C360
- CuCopper C110
- TiTitanium Grade 5
- InInconel 718
- MoMonel 400
- StSteel 1018 / 4140
- TSA2 / D2 Tool Steel
- MgMagnesium AZ31B
- ZnZinc Alloy
- PKPEEK
- DLDelrin / Acetal
- PTPTFE
- UHUHMW-PE
- UIUltem / PEI
- NyNylon PA6 / PA66
- PCPolycarbonate
- ABSABS
- POAcetal POM
- HDHDPE
- ACAcrylic PMMA
- PPPolypropylene
- PVPVC
- G1G10 Garolite
- CFCarbon Fibre CFRP
- FGFiberglass GFRP
- KvKevlar / Aramid
- BkBakelite
- SiSilicone / EPDM
- CeAlumina Ceramic
- CeZirconia Ceramic
- FmRohacell Foam
Industry-Recognized Certifications
Our certifications are not paperwork — they define our production methodology, inspection protocols, and continuous improvement culture.
Quality Management Systems
Consistent process control and continuous improvement across all machining operations.
Medical Device Quality
Precision machining of surgical and implantable instruments with full traceability.
Automotive Quality System
PPAP, FMEA, control plans, and SPC for automotive-grade machined components.
Aerospace & Defence
Full material traceability and FAI for flight-critical aerospace programs.
Environmental Management
Sustainable machining with coolant recycling and reduced carbon footprint.
ITAR & EAR Compliance
Compliant manufacturing for US defence and aerospace export-controlled programs.
Our CNC Prototyping & Production Process
A rigorous, transparent workflow from first enquiry to final delivery. Every stage is documented, inspected, and communicated — no surprises, no rework.
CNC Machining CapabilitiesInquiry & Quoting
Upload your STEP/IGES file or engineering drawing. Our applications engineers review every submission and respond with a detailed, itemised quotation within 24 hours.
DFM Review
Design for Manufacturability analysis at no extra charge. We flag thin walls, tight-radius features, undercuts, and potential tolerance stack-up.
CAM Programming
Hypermill and Mastercam toolpath generation optimised for each axis configuration with collision simulation and virtual verification.
Machining & In-Process QC
Renishaw on-machine probing verifies datum positions and critical features mid-cycle. SPC active on all volume production runs.
Finishing & Dispatch
Post-machining surface treatments, final CMM report, CoC, and material certs included. Packaged to your specification — DDP, FOB, express.
From Shenzhen to the World — Our Supply Process
A streamlined four-stage workflow with complete visibility at every step. From your CAD file to your door — typically in 5–15 business days.
CNC Machining CapabilitiesInquiry & Quote
Upload STEP/IGES file or email drawings. Receive a full, itemised quotation with DFM notes within 24 hours.
DFM & Programming
Design review, CAM toolpath generation, fixture design, and material procurement.
Machining & QC
In-process Renishaw probing, CMM dimensional verification, and 100% visual inspection.
Packaging & Dispatch
Custom packaging. DHL/FedEx express, air freight, or sea freight. DDP available.
Headquartered in Shenzhen, China — serving clients across North America, Europe, Australia, Japan and Southeast Asia. Express delivery typically 5–7 business days.
Precision Multi-Axis CNC Machining — Global Reach from Shenzhen
Founded in 2015, Metalworks Plus is a trusted manufacturing partner for high-tolerance milled and turned components across aerospace, medical device, automotive, defence, and advanced industrial sectors, with 11+ years of precision CNC machining experience.
Our core expertise spans the full axis spectrum: 3-axis CNC milling for cost-effective prismatic components, 4-axis CNC milling with rotary indexing for complex cylindrical geometries, and full 5-axis simultaneous CNC milling for intricate single-setup production — delivering undercuts, freeform contoured surfaces, deep cavities, and compound angles with micron-level accuracy (±0.001mm to ±0.005mm).
- Renishaw spindle probing with in-process part verification — eliminating rework
- Fanuc, Siemens & Heidenhain CNC controls — maximum toolpath fidelity
- Full CMM dimensional inspection with traceable reports on every order
- DFM (Design for Manufacturability) review included at no additional cost
- DDP shipping: we handle all customs documentation and duties globally
Frequently Asked Questions
Everything engineers and procurement managers need to know about our multi-axis CNC machining services.
Ask a Technical QuestionStart Your Project Today
Our engineers review every inquiry personally. Upload a CAD file or describe your project — we respond within 24 hours with a full quotation.
Direct Contact
Guangming, Shenzhen, Guangdong, China
No. 39 Xishi Road, Hewan Community, Guangming, Shenzhen
Your Parts. Quoted in 24 Hours.
Delivered Globally.
Upload your CAD file or describe your project. Our engineering team responds with a full quotation, DFM feedback, material alternatives, and lead-time estimate within one business day.