Executive Summary
Selecting the right material for a machine part is far more than a technical detail — it’s the foundation of performance, precision, and profitability. Every component, from a simple bolt to a high-speed spindle, relies on material properties that align with its intended function. Strength, wear resistance, weight, cost, and corrosion protection all play vital roles in how well a part performs and how long it lasts.
Table of Contents
- Carbon Steel
- Alloy Steel
- Нержавеющая сталь
- Aluminum Alloys
- Brass & Bronze (Copper Alloys)
- Cast Iron
- Titanium Alloys
- Tool Steels
- Engineering Plastics
- Composites & Advanced Materials
Conclusion & Recommendations
FAQs
1. Carbon Steel
Overview
Carbon steels remain the workhorse of manufacturing due to a favorable balance of strength, machinability, and cost.
Representative Grades
AISI 1018, AISI 1045.
Typical Applications
Shafts, fixtures, structural frames, general-purpose fasteners.
Design Considerations
Specify surface protection for corrosion-prone environments; consider heat treatment (quench & temper) to improve wear resistance.
2. Alloy Steel
Overview
Alloying elements (Cr, Mo, Ni) increase toughness, fatigue strength, and hardenability for highly stressed parts.
Representative Grades
4140, 4340.
Typical Applications
Crankshafts, high-load gears, heavy-duty bearings.
Design Considerations
Requires controlled heat treatment and post-process stress relief to prevent distortion.
3. Stainless Steel
Overview
Offers corrosion resistance, attractive surface finish and biocompatibility in select grades.
Representative Grades
304, 316, 17-4 PH.
Typical Applications
Food equipment, medical devices, maritime components, hygienic fasteners.
Design Considerations
Expect higher material and machining costs; work-hardening behavior must be considered for forming operations.
4. Aluminum Alloys
Overview
Excellent strength-to-weight ratio with strong corrosion resistance and thermal conductivity.
Representative Grades
6061-T6, 7075-T6.
Typical Applications
Lightweight housings, aerospace fittings, heat sinks.
Design Considerations
Careful selection for wear-critical parts; anodizing improves surface hardness and corrosion resistance.
5. Brass & Bronze (Copper Alloys)
Overview
Copper alloys deliver superior machinability, conductivity and bearing properties.
Representative Grades
C36000 (free-machining brass), C93200 (bearing bronze).
Typical Applications
Bushings, fittings, low-friction sliding components.
Design Considerations
Preferable where low friction or electrical conductivity is required; account for higher material price compared to steels.
6. Cast Iron
Overview
Cast irons provide excellent damping and economical shaping for complex geometries.
Representative Grades
Gray cast iron, Ductile (nodular) iron.
Typical Applications
Machine beds, gearbox housings, engine blocks.
Design Considerations
Good for compressive loads and vibration control; avoid in high-tension applications because of brittleness.
7. Titanium Alloys
Overview
High strength-to-weight and excellent corrosion resistance make titanium ideal for performance-critical parts.
Representative Grades
Ti-6Al-4V.
Typical Applications
Aerospace components, medical implants, high-performance fasteners.
Design Considerations
High cost and specialized machining requirements; consider when weight savings justify expense.
8. Tool Steels
Overview
Designed for wear resistance and dimensional stability under high temperatures.
Representative Grades
A2, D2, H13.
Typical Applications
Dies, molds, cutting tools and stamping components.
Design Considerations
Precision heat treatment and grinding are necessary; design for tool life and maintainability.
9. Engineering Plastics
Overview
Polymers like POM, Nylon, PTFE and UHMW are used where low friction, corrosion resistance and lightweight are priorities.
Representative Grades
Acetal (POM), Nylon 6/6, PTFE.
Typical Applications
Low-load gears, bushings, wear strips, electrical insulators.
Design Considerations
Account for thermal limits, creep, and moisture absorption in dimensional tolerancing.
10. Composites & Advanced Materials
Overview
Carbon-fiber and metal-matrix composites provide tailored stiffness, strength and weight advantages.
Representative Materials
CFRP (carbon-fiber reinforced polymer), GFRP.
Typical Applications
Aerospace structural members, motorsport components, high-performance housings.
Design Considerations
Manufacturing processes are specialized (layup, curing); consider repairability and inspection requirements.
Conclusion & Recommendations
Material selection must balance mechanical demands, environmental exposure, manufacturability and cost. For most general-purpose machine parts, start with carbon or alloy steels and move to stainless steel, aluminum or titanium based on corrosion, weight or performance requirements. For bearing and low-friction needs use bronze/brass; select engineering plastics where noise, weight, or chemical resistance are primary drivers; reserve composites for applications where weight and stiffness are mission-critical.
Practical Specification Checklist
- Define mechanical requirements (yield, tensile, fatigue).
- Specify environment (corrosion, temperature).
- Determine manufacturability (machining, casting, forming).
- Include surface treatments and tolerances.
- Estimate lifecycle cost (material + processing + maintenance).
FAQs
Q: How do I choose between 6061 and 7075 aluminum?
A: Choose 6061 for general machining and corrosion resistance; 7075 when high strength is critical and corrosion can be mitigated.
Q: When should I specify stainless steel over carbon steel?
A: Use stainless steel for corrosion-prone environments, hygienic or aesthetic needs, or when biocompatibility is required.
